Protect-A-Pool Fence Kit A 8 Section Base Kit Tan

Protect-A-Pool Fence Kit A 8 Section Base Kit Tan
Protect-A-Pool Fence Kit A 8 Section Base Kit Tan
Protect-A-Pool Fence Kit A 8 Section Base Kit Tan

Protect-A-Pool Fence Kit A 8 Section Base Kit Tan
Protect-A-Pool Fence – Kit A 8 Section Base Kit – Tan. PROTECT-A-POOL above-ground fence adds a new level of security to above-ground pool safety. The modular fence is made from sturdy yet lightweight rust proof resin and can be installed by pool owners with little effort. The attractive fencing keeps toys, balls and floats within the pool and at the same time minimizes pool use by unauthorized guests and pets. Base Kit (Kit A) required. Not For Use With Quick Set Pools. Dimensions: 62″ W x 22.5″ H x 42″ rails with 4″ between spindles. Fits most 48″ or 52″ above ground pools. Keeps pool toys in. Base kit includes 2 end posts – one to start installation and one to end installation. Above Ground Fencing Sizing Chart. All items are brand new. These rates apply to the lower 48 states only. Box & APO/FPO Addresses. If you fail to receive your order within 1 week, please notify us immediately. The free listing tool. The item “Protect-A-Pool Fence Kit A 8 Section Base Kit Tan” is in sale since Friday, July 12, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Fences”. The seller is “dohenypoolsuppliesfast” and is located in Mount Horeb, Wisconsin. This item can be shipped to United States.
  • Brand: Protect-A-Fence
  • MPN: 8 SECTION KIT TAN

Protect-A-Pool Fence Kit A 8 Section Base Kit Tan

10’x40′ Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs

10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs

10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs
Choose to add 10 foot pads included. Steel Frame Carports, Tents and Shades are a lot easier to build yourself than most people realize. We’ve made building one easy for you by creating this combo kit. This kit contains the parts you require to build your own customized canopy tent without the poles for the legs, the length ridge poles and the rafter poles. You will need to get these 1-3/8 fence poles from your local hardware store. You can have the store cut the pole into desired sizes if you don’t find pre-cut ones. You are provided the necessary 1-3/8 pole fittings plus a matching Heavy duty polyethyleneTarp and Ball bungee ties to secure your tarp to the tent frame. You may like to add 10 Foot Pads from the drop down menu. IDEAL FOR: vehicle or trailer storage, outdoor art shows, picnic, and flea/farmers’ markets. Temporary seasonal storage and protection from sun, rain and other elements of weather. THE HIGH PEAK GALVANIZED STEEL FITTINGS have Inside diameter of 1-3/8″ and are designed for use with 1-3/8″ fence pipes (with 1-5/16 actual OD). THE HEAVY DUTY HQ BALL BUNGEES designed to securely hold Tarps to the frame have large plastic ball ends to prevent slipping. Made from high quality rubber with woven cover for durability they help to prevent tarp from tearing (provide some “flex” for wind gusts, absorb sudden jerks and distribute the loading force between the grommets). HDPE TARP is 12 mil thick with the following other features. Finished size: 11’6″ x 39’4″. Triple coated lamination (water resistant polyethylene coating). 14 x 14 black yarn weave (woven vertical and horizontal). Poly roping in hem all around and reinforced corners for extra strength. Water and mildew resistant. 3-Way 1-3/8 High Peak Galvanized Steel Fittings x 6pc. 4-Way 1-3/8 High Peak Galvanized Steel Fittings x 9pc. Heavy Duty Ball Bunge Cords. Tarp (12ft wide tarp is required to compensate for the 2′ lost to the peak of the frame). Choose to add 10 Foot Pads. NOT INCLUDED IN KIT: 1-3/8 Outer Diameter Tubings for legs, ridges and rafters (You will need to get this from your local hardware store). We offer replacement for defective items. Thank You for Looking. The item “10’x40′ Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs” is in sale since Sunday, September 3, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Structures & Shade\Other Structures & Shade”. The seller is “narda393″ and is located in USA. This item can be shipped to United States.
  • Material 1: 16 gauge galvanized steel fittings + Foot Pads
  • Material 2: 12 mil super heavy duty polyethylene Tarp
  • Material 3: Heavy duty Rubber Ball Bungees w/ woven cover
  • Package Weight: ~ lbs.
  • Bundle Listing: Yes
  • MPN: Does Not Apply
  • Material: 10 Foot Pads Available
  • Brand: Unbranded
  • REQUIRED BUT SOLD SEPARATELY: 1-3/8″ galvanized steel Poles
  • INCLUDED IN KIT: 16-Ga Steel Fittings+Cover Tarp+Ball Bungees
  • Style: High Peak Heavy Duty 16-Ga Carport
  • Type: Carport Canopy Kit
  • Features: All weather protection

10'x40' Carport Canopy Kit RV Boat Tent for 1-3/8 Fence Tubing witho Poles/Legs

Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle

Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle

Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle
Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle. Brand New in Original Packaging. Kreg Multi-Purpose Shop Stand. Kreg Precision Router Table Fence. Kreg Precision Router Table Top. Kreg True-FLEX Featherboard (2-pack). Kreg 3 Dual-Locking Casters (4-pack). Kreg Multi-Purpose Router Table Switch. Kreg Level-Loc Reducing Rings (5-piece Set). Kreg Precision Router Table Setup Bars. Kreg Precision Router Table Stop. 4 x leveling feet. T-square style saw carriage. Kreg Precision Router Table Top with Easy-Slide laminate surface. 3/8-thick (9mm) insert plate. 4 x Precision Insert-Plate Levelers. 3 x Level-Loc Reducing Rings. The Kreg Multi-Purpose Shop Stand is a sturdy platform that can be used with any of Kreg’s tabletop work surfaces. It’s a DIY stand made of steel and features adjustable leveling feet that allow you to raise and lower the table’s height according to your needs or compensate for uneven floors. There are a number of pre-drilled holes for adding accessories and customization and the stand is finished with a durable powder-coated finish that protects the stand from damage. Heavy-duty, Easily Adjustable Steel Stand. The Kreg KRS1035 shop stand is made of rugged 12 and 16-gauge steel and can be adjusted from 31″ to 39″ high. It has levelers to compensate for uneven floors, as well. To add portability, the levelers can be removed and replaced with Kreg’s optional locking wheels which allow you to easily move this Kreg universal steel stand around your workshop. The Multi-Purpose Shop Stand is designed to be compatible with any of Kreg’s tabletop solutions including the Precision Router Table Top and the Klamp Table and other Kreg tools. Its wide 20 x 28 Inch footprint provides stable support for any work surface you use with it. Plus, the table stand has predrilled holes that make it easy to mount accessories or further customize it to suit your needs. Compatible with Kreg Router Table. Made with 12 and 16-gauge all purpose steel construction. Struts are adjustable from 29″ to 35″. Pre-drilled holes for customization. Perfect for a DIY TV stand. The Kreg Precision Router Table Fence is an extremely versatile router tool that allows you to take your do-it-yourself woodworking projects to the next level. The fence works with Kreg’s full-size router table, and it locks in place with a large paddle lock and a quarter-turn lock to hold it in place as you work. There’s also a built-in dust collection system that makes cleanup a snap once you’re done working for the day, too. Whether your carpentry project is big or small, the Precision Router Table Fence will help you quickly and efficiently complete the task. Multi-Purpose, Self-Squaring Router Table Fence System. The Kreg PRS1015 fence is made of anodized aluminum and has a table saw-style T-square adjustment system that guarantees the fence will always sit parallel to the miter-gauge slot. This Kreg router fence is easy to adjust with one hand and can be locked in place with a set of dual locks. There’s a measuring scale that ensures precise positioning of the fence, as well. The scale uses a micro-adjust wheel to provide exact measurements and easy setups. Independent Sliding Fence Faces. The Precision Router Table Fence has two independently operating sliding faces that can be positioned precisely where you need them to provide support close to the bit and to maximize chip and dust collection with the fence’s built-in dust port. Two jointing rods are included. Just slide them into position behind the outfeed fence face, and the fence doubles as a jointer for putting perfect edges on boards. Get real precision on any router table, including the Kreg router table. A single-side, universal-mounting design allows the router table fence to be securely attached to most router table tops from 3/4″ to 1 1/2″ thick. Compatible with the Kreg Precision Router Table. 36 anodized aluminum with T-square style saw carriage. Built-in dust collection and jointing feature. 1 large paddle lock and 1 quarter-turn lock. Independent sliding fence faces. The Kreg Precision Router Table Top is an extremely versatile table top that allows you to take your do-it-yourself woodworking projects to the next level. This table combines a large work surface, low-friction surface and a heavy-duty insert plate to provide enough options to meet all of your routing needs. The Kreg table also features a 1 MDF core that absorbs vibrations to provide a stable work surface. The Kreg PRS1025 is a versatile table top that you can adapt to any routing job you’re working on. Solid, Secure and Quiet Routing Solution. This solid and rugged MDF high performance router table top provides a solid, secure and quiet solution for any workshop. A 1 (25mm) thick MDF core makes for a flat and solid top that absorbs vibrations, while steel-reinforcing struts stop sagging even when constrained by the weight of heavy routers and lifts. High-Performance Kreg Router Table Top and Fence. The aluminum fence sits on a large 24″ x 32″ tabletop surface with a 1 thick, shock absorbing MDF core. The core also adds mass to the table to provide a stable work surface. The table top is covered with a high-pressure laminate surface that creates a smooth surface so you can easily slide your woodworking projects around with a minimum of friction. The legs of the Kreg router table are made of reinforced steel to guarantee years of stability even when subjected to regular use. The surface of the Precision Router Table is covered with a high-pressure laminate skin called Easy-Slide that’s durable and provides a low-friction working area. The smooth surface allows you to easily maneuver projects across the entire area of the table top. There’s also edgebanding that protects the top against bumps and abrasions so your table top will retain its low-friction surface for a long time. A feature-packed, heavy-duty 3/8″ x 9 1/4″ x 11 3/4 router insert plate easily handles large routers. Versatile and useful Level-Loc Reducing Rings lock in level and flush with the plate surface using the included ring wrench. A brass starter pin enables controlled bit contact during freehand routing. The laser-engraved target pattern on the underside of the router table plate makes for easy, precise router centering and mounting. Four included Precision Insert Plate Levelers keep router plate and tabletop surfaces flush. This handy table top works with standard (3/8″ x 3/4″) miter gauge guide bars. It is a durable anodized aluminum table top that also accepts Featherboards and other accessories. Part of a Custom Router Table System. Use this router table top with the Precision Router Table Fence and Multi-Purpose Shop Stand from Kreg to create a custom router table system. Or create a system using a shop-made fence and stand. 1 thick table surface with vibration-reducing MDF core. 24″ x 32″ surface area. Compatible with standard miter gauge guide bars. The Kreg True-FLEX Featherboard (2-pack) provides a consistent and optimal amount of pressure, unlike many featherboards. The Kreg True-FLEX Featherboard (Twin Pack) is part of Kreg’s line of Kreg Precision Routing Systems and Accessories that provide optimum solutions for DIY and precision routing. The True-FLEX Featherboard derives its name from the expert engineering that went into designing it. Other featherboards often apply too much or not enough pressure, which means inexact cuts and safety issues. True-FLEX delivers just the right amount of pressure to the workpiece. The True-FLEX Featherboard will operate at heavy use for years in a woodshop. It’s constructed out of an ultra-durable plastic composite body. This featherboard includes a Wedge-Lock System that makes it possible to secure it to a number of shop tools without any extra hardware. The Wedge-Lock System easily adjusts to a miter slot or T-slot, table saw or router table. It is designed to be used in a standard 3/8″ x 3/4″ (9mm x 19mm) miter slot. Careful design of fingers to apply optimum pressure. Wedge-Lock hardware compatible with miter slot or T-slot. Rugged plastic composite body. Use with standard 3/8″ x 3/4″ (9mm x 19mm) miter slot. 2 x Kreg True-FLEX Featherboard with Wedge-Lock hardware. The Kreg 3 Dual-Locking Casters (4-pack) are designed to give the Multi-Purpose Shop Stand (KRS1035) mobility and versatility. This set of 4 heavy-duty locking casters are a valuable accessory for the shop stand. The Kreg PRS3090 Dual Locking Casters are built for durability and will maintain performance over a long period. The dual-locking mechanism ensures that the casters will not roll or pivot once they are engaged. The Kreg 3 Dual-Locking Casters (Set of 4) give you a very stable workstation. These casters are part of Kreg’s line of Precision Routing Systems and Accessories. Kreg Routing Solutions provide the maximum capability and durability necessary for DIY and precision routing. Provide mobility for the Multi-Purpose Shop Stand. Heavy-duty build for long-lasting performance. Dual-locking mechanism prevents rolling and pivoting. Enables extremely stable workstation. 4 x 3 (76mm) dual-locking casters. Make your Kreg Precision Router Table safe and convenient when you use this power switch. The Kreg Multi-Purpose Router Table Switch is a unique switch featuring a two-plug design that allows you to control two independent devices at one time. It also features Key-Lok, which prevents unintentional power-on, and an 8-foot-long, heavy-duty, 14-gauge power cord. The Kreg Router Table Switch is a perfect complement to the Kreg Precision Router Table (PRS1045) and Kreg Precision Benchtop Router Table (PRS2100). What is the Purpose of a Switch? The Kreg Multi-Purpose Router Table Switch makes your Kreg Router Table safer and more convenient thanks to its protection against accidental power-on, extra-long, heavy-duty power cord and its two-plug design that lets you control two devices simultaneously. It is a vital addition to your collection of Kreg tools. Key-Lok eliminates accidental powering on. 8′ heavy-duty 14-gauge power cord. Compatible with Kreg Precision Router Table. Also works well with Kreg Precision Benchtop Router Table. The Kreg Level-Loc Reducing Rings (5-piece Set) is designed to fit the Kreg Precision Router Table Insert Plate and the Kreg Precision Router Table Lift. This compatibility makes it possible to customize the size of the opening around the bit. This five-piece set of Kreg Level-Loc Reducing Rings includes rings with 3/4″, 1 3/8″, 1 5/8″ and 2 1/8″ (19mm, 35mm, 41mm, 54mm) openings, as well as one “blank” ring that can be used to create a custom-sized or zero-clearance ring. The Kreg reducing rings come with a molded storage tray that has slots to hold all five Level-Loc Reducing Rings, plus slots to hold the three rings that come with the Precision Router Table Insert Plate or Precision Router Table Lift. Each slot is marked with the opening size, making it easy to keep the rings organized. Level-Loc Reducing Rings (Kreg PRS3050) are a valuable accessory for your Kreg Router Table. 3/4″, 1 3/8″, 1 5/8″ and 2 1/8″ openings. Includes one “blank” ring to create custom-sized ring. Comes with molded slotted storage tray. Slots are marked with opening size. 5 x Kreg Level-Loc Reducing Rings (5-piece Set). Setting your tool at the precise necessary height is crucial, whether you are working with a table saw, Kreg router table or shaper. Kreg Precision Router Table Setup Bars feature an exclusive three-gauge design that makes them ideal for many applications. Each setup bar has a concave step at the bottom that straddles your router bit or saw blade, allowing more exact height adjustments. On the top edge of each bar is a step that acts as a gauge to test the depth of your cuts once complete. There is another step on the end of the Kreg setup bars that can be used to set the distance between a tablesaw blade and the fence or between a router bit and the fence. Each Precision Router Table Setup Bar is constructed from soft aluminum that is designed to guard against damage to your router bit or saw blade in the event that they make contact during setup. Exclusive 3-gauge design perfect for many applications. Each bar features steps on top, bottom and ends. Concave step on bottom to precisely adjust height. Top step acts as gauge to test depth of completed cuts. End step sets distance from tablesaw blade or router bit to fence. Soft aluminum build to prevent router bit and saw blade damage. 7 x Kreg Precision Router Table Setup Bars. Your Kreg Precision Router Table needs accuracy and repeatability, and this unique Kreg stop is the way to get it. The Kreg Precision Router Table Stop comes in an aluminum design with a low profile. This table stop is conveniently crafted to flip out of the way when you are not using it. The Precision Router Table Stop comes with a Precision Lens Cursor that provides a clear, accurate view of the fence’s tape. It is designed for compatibility with the Kreg Precision Router Table. Flips to stay out of way when not in use. Precision Lens Cursor provides clear and accurate view. In the Continental US Lower 48 states only. We cannot declare items at a lesser value or as gifts. Territories and International orders. F There are product categories which are not returnable due to hygienic or sanitary as required by manufacturers. In an event where there is an error regarding a price error or description, we will notify you ASAP. Items removed from their’blister-pack’ display packaging are non-refundable. The item “Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle” is in sale since Wednesday, June 27, 2018. This item is in the category “Home & Garden\Tools\Power Tools\Router Tables”. The seller is “asavings” and is located in Brooklyn, New York. This item can be shipped to United States.
  • Brand: Kreg
  • MPN: PRS1045CP-KIT
  • UPC: 646791432035
  • Manufacturer: Kreg
  • International Availability: Not Available

Kreg Multi-Purpose Shop Stand with Precision Router Table Top and Fence Bundle

Above Ground Swimming Pool Safety Fence Kit A 08 Spans

Above Ground Swimming Pool Safety Fence Kit A 08 Spans
Above Ground Swimming Pool Safety Fence Kit A 08 Spans
Above Ground Swimming Pool Safety Fence Kit A 08 Spans
Above Ground Swimming Pool Safety Fence Kit A 08 Spans

Above Ground Swimming Pool Safety Fence Kit A 08 Spans
Above Ground Swimming Pool Safety Fence – 08 Spans KIT A. Kit A is the starter kit for your safety fence installation. Kits B and C are accessory kits. Before you can install Kit B or Kit C, you must have Kit A. Protect Your Children with Premium Guard. With properly installed above-ground pool fencing, you can take control of a potential hazard on your property. As a very real threat, an unprotected pool can quickly become a drowning risk to toddlers, children and even pets. This Sentry Safety Premium Guard fence adds a new level of security to above ground pool safety. The modular fence is made of rustproof PVC resin which is durable but also lightweight. It can easily be installed by pool owners as a. Premium Guard creates a visually well-manicured appearance. The Premium Guard fence offers the following features. Comes in sections that link together to form a sturdy fence. Premium Guard attaches to the pool’s existing braces. Easy to clean, maintenance free resin – use a hose for a quick spray down (harder dirt can be removed with sponge & soapy water). The uprights are a square design for ultimate rigidity and equal impact force absorption from all sides of the above ground pool fence. The top and bottom rails are rectangular and hold 2.5 of the pickets for decreased risk of impact damage to the pickets. The fence is 22.5″ tall and has a spacing of 4″ between pickets. Comes with all needed hardware for a simple DIY installation. Each span of fence is made 60″ wide for the largest known pool brace span opening and then can easily be cut down to size to fit your pool using common household tools like a hacksaw a “brace span is. Between two pool uprights. Sentry’s Premium pool fence provides a full kit for your DIY installation. White coated stainless-steel screws. Premium Guard above ground safety pool fence is made of rustproof PVC resin. It’s durable yet. Because it comes in sections and is so. It’s easy to carry. Premium Guard pool fence comes exclusively in white for a clean, visually enhanced appearance. Premium Guard pool fence is easy to install and makes a great DIY project. For your convenience, the modular fence pieces have pre-drilled holes in the PVC uprights. Our finishing trim pieces (like end caps) just snap in for a completed look. Here is a list of tools you should gather as you prepare to erect your fence. Drill with 1/8 drill bit. If you have a long span (over 60″), a deck that will interfere with a span or are putting in a gate into a span 38″ or larger you may need to use an Artificial Upright. This will require further supplies. Check out the following instruction videos for installing the following pieces. Peg and Top Span. We advise you to use a reputable carrier service when returning your goods. It’s the quickest, easiest, and most secure way to pay for your goods or services online. We guarantee that your issue will be solved quickly. We usually respond within 24 hours on weekdays. See our other items. It can easily be installed by pool owners as a safety-centric home project. The Premium Guard fence offers the following features: — Comes in sections that link together to form a sturdy fence — Premium Guard attaches to the pool’s existing braces. — Easy to clean, maintenance free resin – use a hose for a quick spray down (harder dirt can be removed with sponge & soapy water). — The uprights are a square design for ultimate rigidity and equal impact force absorption from all sides of the above ground pool fence. — The top and bottom rails are rectangular and hold 2.5 of the pickets for decreased risk of impact damage to the pickets. — The fence is 22.5″ tall and has a spacing of 4″ between pickets. — Comes with all needed hardware for a simple DIY installation. — Each span of fence is made 60″ wide for the largest known pool brace span opening and then can easily be cut down to size to fit your pool using common household tools like a hacksaw (a “brace span is the distance between two pool uprights). It’s durable yet lightweight. Because it comes in sections and is so lightweight it’s easy to carry. Here is a list of tools you should gather as you prepare to erect your fence: — Measuring tape — Pencil — Hacksaw — Drill with 1/8″ drill bit — Phillips head bit If you have a long span (over 60″), a deck that will interfere with a span or are putting in a gate into a span 38 or larger you may need to use an Artificial Upright. The item “Above Ground Swimming Pool Safety Fence Kit A 08 Spans” is in sale since Tuesday, June 21, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Swimming Pools\Above-Ground Pools”. The seller is “prismauctioninc.” and is located in Odessa, Florida. This item can be shipped to United States.
  • Color: White
  • Bundle Listing: No
  • Model: Kit A
  • Country/Region of Manufacture: China
  • Material: Polymer
  • Type: Frame
  • MPN: Does Not Apply
  • Brand: Sentry Safety

Above Ground Swimming Pool Safety Fence Kit A 08 Spans

Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2

Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2
Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2
Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2
Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2
Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2
Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2
Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2

Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2
Rolling Gate Hardware Double Kit for Chain link Fence rolling gate includes. 5 Rolling Gate Track Bracket. Track Bracket fits 2-1/2 – 3 inch – Universal Track Bracket. Universal Track Bracket for 1-5/8″ or 2″ fence posts. Track brackets are used with rolling chain link gates to mount the gate track to the fence posts. Simply cut the 1-5/8 pipe to the size you need and slide pipe over the track bracket. Mounts to either 1-5/8″ or 2″ fence posts. Secure mount with included hardware. 1 Double wheel carrier Rolling Gate wheel carrier (Adjustible) with 2 Wheels. 1 Rolling Gate Latch Gate Latch size 1-5/8inch. 2 Rolling Gate Guide Rollers, Rear Wheels. 1 – 8 Double Wheel Carrier. 2 – 6 Wheels. 6- Universal Track Brackets. 2 – Pipe Track Rollers with U Bolts Brackets. 1 – Rolo Latch. Chain link rolling gate double wheel carriers are used on residential, commercial, and industrial rolling gates. Wheel carriers are galvanized, include u-bolt(s), and are weldable for a more secure fit. Typically, one double wheel carrier is required per single chain link gate to support the’leading edge’ of the gate. Rear of sliding gate is usually placed on a track made from tubing and supported with rear wheels, bolted to the gate with rear wheel brackets to fit 1-5/8″ or 2″ chain link gate frames. Rolling gates usually do not have any sort of track embedded in the driveway. Instead,’gate tracking’ is accomplished with the gate track installed on adjacent fence line. Rolling gates are only one type of sliding chain link gates, perhaps the least expensive. Please Note: Due to manufacturing differences, the product you receive may not match the picture exactly. The item “Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2″ is in sale since Thursday, August 25, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Structures & Shade\Other Structures & Shade”. The seller is “gateopeners-and-more” and is located in Hollywood, Florida. This item can be shipped to United States.
  • Brand: L.A.Ornamental
  • MPN: ChainLink-RG-Kit
  • Model: Chainlink Rolling Gate Kit
  • Material: Galvanized Steel
  • Main Color: Galvanized
  • Complete Kit Include:5 Bracket: Front Wheel Carrier,2 Guide Rollers W / Hardware

Gate Fence Hardware Kit Chain Link Rolling Gate Track Brackets Rollers Lot 2

Incoming search terms:

  • 2 1/2 inch x 3 1/2 inch adjustible vinyl fence brackets

Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New

Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New

Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New
Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New. The Linden 6 ft. H x 8 ft. W White Vinyl Pro Privacy Fence Panel Kit has do-it-yourself friendly styles to professional grade fencing. This vinyl fence offers the perfect combination of high quality and low maintenance you have been looking for. The lightweight design makes installation fast and easy. Made of durable, low maintenance vinyl. White finish adds elegance to your home. Unlike wood fences, it does not require sanding nor painting. Lightweight design for easy and fast installation. Solid vinyl panels eliminate gaps and knot holes common in wooden privacy fences. Withstands the impact of rain and moisture better than wood fences. W with a privacy panel pattern. Materials needed: panel kit, posts, post tops, post clips, concrete and pea gravel. Seamless look built for various terrains. Easy to install for the do-it-yourselfer. Walk gate or (model #73025430) 5 ft. Post tops (various styles available) attach easiest by using Veranda post top clips (model #73014080). Panel follows the slope of your yard. Actual panel height in. Actual panel thickness in. Actual panel width in. Nominal panel height ft. Nominal panel width ft. UV Protected, Water Resistant. No Additional Items Included. Nominal panel thickness in. Number of pickets for panels. Number of rails for panels. The item “Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New” is in sale since Monday, April 30, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Fencing\Fence Panels”. The seller is “homegoodszone” and is located in Los Angeles, California. This item can be shipped to United States.
  • Material: Vinyl
  • Brand: Veranda
  • MPN: 73013298
  • Length: 8ft
  • Height: 6ft
  • Color: White

Vinyl Privacy Fence White Panel Kit 6 x 8 Ft Durable Solid Quality Yard Home New

PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500′ 20 Gauge Wire Kit

PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500' 20 Gauge Wire Kit
PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500' 20 Gauge Wire Kit
PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500' 20 Gauge Wire Kit
PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500' 20 Gauge Wire Kit

PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500' 20 Gauge Wire Kit
Pets are Family too! PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500′ 20 Gauge Wire Kit. Petsafe In-Ground Stubborn Dog Fence. 500 ft of Wire – 1/3 Acre. Hard-headed or hard of hearing? Now you can still keep them playing safely in the yard and nowhere else. Even dogs that resist training respond well to this system. With 4 higher-intensity settings, these harmless electrical stimulations work so effectively that most dogs will learn to stop in their tracks at the sounds of the early warning tone before any stimulation. Plus, its vibration option is ideal for hearing-impaired or senior dogs! &###xA0; How the Dog Fence Works. &###xA0;A radio signal travels though a buried wire, marking the boundaries you wish to set for your dog. Your dog wears a Receiver Collar that detects the signal at the boundary. As your dog approaches the boundary, the receiver issues a warning tone with vibration. If he proceeds further, he receives a safe but startling Static Correction. There are 4 levels of Static Correction, adjustable to your dog’s temperament. While harmless, the Correction will persuade him to stay in the Containment Area you’ve established. The Stubborn Dog Receiver Collar offers the highest intesity correction for large dogs, strong-willed or hard to train pets. For dogs 8 pounds and up, or neck sizes 6-28 – however , the collar may be too bulky or cumbersome for smaller dogs 20 lbs or less. Covers up to 1/3 acre with included wire. Expandable up to 10 acres with additional boundary wire (not included). 4 adjustable levels of static correction with highest intensity levels available. Tone and Vibration mode. Level 1 – Tone and vibrate (No static correction). Level 2 – Mild Static Correction. Level 3 – Medium Static Correction. Level 4 – Medium High Static Correction. Level 5 – High Static Correction. Tone with vibration option alerts your pet with a beep and vibration. Progressive Run Through Prevention. Collar uses PetSafe 9-Volt alkaline battery (included). Works with multiple dogs and cats (additional receiver collars required). Transmitter with power adapter. 2 Receivers collar with 9-Volt alkaline battery. Operating and training guide. 50 boundary training flags. 500 feet of wire. We are an Authorized Retailer for the Brands listed below, and many more. &###xA0; If UPS is working, so are we! &###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0; &###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&##xA0. We understand that there may be instances when you must return our product. Please follow and understand our guidelines for an easy return procedure. If parts are missing, we will deduct the cost of the missing item. If it is the customers choice to return an item ie. Changed mind, don&###x2019;t like, doesn&###x2019;t fit, etc. Items showing wear or use, evidenced by pet hair, dirt, etc. Items such as Wire Break Detectors, open battery packages, litter boxes, Booster Baths are not returnable. Wire, once unwound and/or off the spool, used flags or sod staples are not eligible for return. See our other items. Petsafe In-Ground Stubborn Dog Fence 500 ft of Wire – 1/3 Acre 20 Gauge Wire 2 Dogs Persistent pooch? How the Dog Fence Works A radio signal travels though a buried wire, marking the boundaries you wish to set for your dog. The item “PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500′ 20 Gauge Wire Kit” is in sale since Friday, October 19, 2012. This item is in the category “Pet Supplies\Dog Supplies\Training & Obedience\Electronic Fences”. The seller is “monellpets4u” and is located in United States. This item can be shipped to United States.
  • Type: In-Ground
  • Brand: PetSafe
  • Model: Stubborn inground Dog Fence
  • MPN: PIG00-10777
  • Theme: Dog Containment
  • Type of Pet: Dog
  • Warranty: 1 Year Manufacturers Warranty
  • Authorized Retailer: Yes We are!

PETSAFE STUBBORN BIG DOG ELECTRIC IN-GROUND Fence 2 Dogs 500' 20 Gauge Wire Kit

Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit

Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit
Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit
Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit
Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit
Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit
Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit

Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit
Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit. Tahoe Slipfence Panel – Corner Post Kit with 8 ft. Post is the corner panel in your fence line and has everything you need all in one simple kit. It’s easy to plot and the kit provides everything needed for your corner panel by stacking the brackets at a right angle to each other on the post. It is also used to step up or down a panel within the middle of your fence line by spacing out the brackets on the post due to grade changes in your fence line. TSF-CPK08 consists of 1 ft. Aluminum Post, powder coated black for outdoor use, 4 – End Brackets to fasten the stringers to the Post in both directions, including stainless grip nuts and carriage bolts, 1 pair black powder coated stringers, 1 standard Post Cap, Aluminum powder coated black and 100 stainless wood screws coated black to fasten fence boards to stringers. 100% Aluminum providing strength and endurance. Black powder coated aluminum guaranteed against rot, decay, warping and rusting. Slipfence gives an upscale and chic look to your wood privacy fence. Combination of aluminum and stainless for eternal outdoor use no rotting twisting leaning or shrinking. Slipfence allows you to use regular off the shelf fence boards for convenience. Pre-fabricated pieces allow you to do it yourself, simple to install. Panel kit comes with 4 end brackets, stringers, screws, nuts, bolts and post cap. Product is designed for post to be secured 24 in. Into ground with concrete. Actual backer rail length in. Nominal backer rail length in. Actual backer rail thickness in. Nominal backer rail thickness in. Actual backer rail width in. Nominal backer rail width in. Actual panel height in. Nominal panel height ft. Actual panel thickness in. Nominal panel width ft. Actual panel width in. Number of rails for panels. Brackets, Hardware, Post Cap, Posts, Rails. Nominal panel thickness in. Number of pickets for panels. We do not accept P. BOXES -PLEASE PROVIDE A PHYSICAL ADDRESS. &###xA0; Because Of The Efficient Manner Of Our Ordering System, Orders Placed Cannot Be Canceled An Hour After They Are Made. These products are manufactured according to the specifications of the US Electrical Standards and codes. We assume no responsibility if the item malfunctions or causes an accident because you tried to use the product with foreign electrical standards. The Use with a converter or other voltage transforming device is at your own Risk. Please Note: Products are designed and rated for use in the US using 120 volt current. With or without a transformer, this product is not recommended for use outside the US. We guarantee that your issue will be solved quickly. I&###xA0;usually respond within 12&###xA0;hours or less. Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit Product Overview Tahoe Slipfence Panel – Corner Post Kit with 8 ft. Into ground with concrete Specifications Dimensions Actual backer rail length in. 92.5 Nominal backer rail length in. 92.5 Actual backer rail thickness in. 125 Nominal backer rail thickness in. 125 Actual backer rail width in. 3 Nominal backer rail width in. 3 Actual panel height in. 96 Nominal panel height ft. 6 Actual panel thickness in. 3 Nominal panel width ft. 8 Actual panel width in. 96 Details Chemical retention lb. 0.00 Number of rails for panels 2 Color Family Black Panel Assembly Unassembled Panel Commercial/Residential Use Commercial / Residential Panel Pattern Privacy Contact Type Allowed N/A Pressure treatment chemical. 25 Treated Features No additional features Product Weight lb. 36.32lb Fencing Product Type Wood Fence Panels Recommended Fastener Screws Includes Brackets, Hardware, Post Cap, Posts, Rails Returnable 30-Day Material Metal Structure type Permanent Nominal panel thickness in. The item “Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit” is in sale since Wednesday, May 17, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Fencing\Fence Panels”. The seller is “beyondhomeimprvmt” and is located in Niagara Falls, New York. This item can be shipped to United States.
  • Material: Wood
  • Brand: Slipfence
  • MPN: TSF-CPK08
  • Height: 8 ft
  • Length: 6 ft
  • Country/Region of Manufacture: Unknown

Outdoor Barrier 6 x 8 Ft Black Powder-Coat Aluminum Corner Post Fence Panel Kit

Privacy Vinyl Fence Panel Kit Yard Lawn Backyard Fencing 6 Ft. H X 8 Ft. W White

Privacy Vinyl Fence Panel Kit Yard Lawn Backyard Fencing 6 Ft. H X 8 Ft. W White
Privacy Vinyl Fence Panel Kit Yard Lawn Backyard Fencing 6 Ft. H X 8 Ft. W White

Privacy Vinyl Fence Panel Kit Yard Lawn Backyard Fencing 6 Ft. H X 8 Ft. W White
Discover the many benefits of Veranda Pro Series vinyl fencing. Made of low-maintenance vinyl, Veranda fencing is built to last for years of enjoyment. Hefty profile provides a stately appearance and excellent durability. Never needs painting or staining. Vinyl panels offer privacy with a neighbor friendly design. 1-panel in each box, this includes top and bottom rails and pickets. Complies with the CPSC’s safety barrier guidelines for residential pools. Check local pool codes to ensure this complies with local regulations. Actual panel height in. Actual panel thickness in. Actual panel width in. Nominal panel depth in. Nominal panel height ft. Nominal panel width ft. Nominal panel thickness in. Number of pickets for panels. Number of rails for panels. Your feedback is very important to us. All merchandise ships from our U. Based warehouses for free within the United States. AK, GU, HI, PR, VI. There they process and forward your item to the address you provided. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. We do our best to process as quickly as possible. We know how important it is for you to get what you ordered and get it fast. Our products are a 100% authentic and brand new. We work with the biggest suppliers of high quality products to bring you only the best items. We consider it a top priority that our customers are happy and in the rare event that they are not, we do everything we can to fix the situation. No customer will walk away from our store unhappy. If there’s a problem, just let us know and we fix it. We guarantee you only the best experience when shopping with us! The item “Privacy Vinyl Fence Panel Kit Yard Lawn Backyard Fencing 6 Ft. H X 8 Ft. W White” is in sale since Thursday, August 4, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Fencing\Fence Panels”. The seller is “bargainhunter108″ and is located in Irvine, California. This item can be shipped to United States.
  • MPN: 203179275
  • Brand: Veranda
  • Model: 203179275
  • UPC: 693829374751
  • EAN: 0693829374751

Privacy Vinyl Fence Panel Kit Yard Lawn Backyard Fencing 6 Ft. H X 8 Ft. W White

40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available

40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available
40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available
40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available
40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available
40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available
40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available

40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available
GENUINE ENERGYTECH PROFESSIONAL ENERGISER. 40km FENCE ENERGISER 12V. Provides a REAL KICK with 9,500V PULSE! Heavy-duty, robust, O-ring sealed! Weatherproof, dustpoof and insect proof. ENERGYTECH – THE VERY BEST IN QUALITY AND CUSTOMER SERVICE. Usually same day dispatch. 2 Years (see below for details). 12 V SYSTEM SUITABLE FOR BATTERY MAINS or SOLAR OPERATION. Battery and solar panels are NOT included in this 12V & mains operation starter pack, however, we offer an optional 30W solar panel kit for full off grid operation. 1 x Energytech 40 km Power Professional Electric Fence Energiser. 1 x 12V cable set to run directly from a 12V battery or any other appropriate 12V supply & mains Powerpack. 1 x Line connection cable. 1 x Earth connection cable. 1 x Installation setup guide & manual. 10W Solar panel with charge controller. 30W Solar panel with charge controller. The 30W panel is fitted with its own “legs” should you want to just place it on the ground but due to the huge range of other possible installation configurations roof/wall/fence post/etc. No other mounting system is provided with the panel and a little DIY skill may be needed to fix a panel where desired. NB: Does not include grounding rod, fence wire or fence-posts. Otherwise ready to go! The 40 km Professional energiser is designed to provide powerful and reliable long term, hassle free use whilst minimising power consumption. This commercial grade energizer is suitable for single-strand, multi-strand or multi-fence set-ups for electric fences with wire lengths of up to 40km! This device is a quality product – double insulated – and has CE and C-Tick approvals and is IP24 rated. Suitable for applications including. Garden and plant protection. Smart Technology for reduced power consumption when used with battery or solar option. “O” Ring sealed case. Weather, dust, and insect proof design. Designed for indoor or outdoor (battery/solar) installation and operation. Can be powered by any suitable 12 V source. Two heavy-duty robust power out connections marked red (positive) and black (negative) for quick and easy hook-up. Heavy-duty fence/earth connection cables and clamps included. Heavy-duty battery connection cables and clamps included for use as temporary standalone unit on battery power (battery not included). With the advent of internet sales and distribution things have changed. Because of this we offer our products directly to the end user at amazingly low prices. Normal misuse/abuse exceptions apply. We carry spare parts IN STOCK. Check out our other energisers in our store including units for fencing up to 50km! Feel free to ask any questions using the question box at the bottom of this advert. The item “40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available” is in sale since Sunday, January 29, 2017. This item is in the category “Industrial\Fencing\Other”. The seller is “energytech_pty” and is located in Tanah Merah, QLD. This item can be shipped worldwide.
  • Livestock Supply Type: Fencing
  • Model: ET-400
  • Type: Fence Charger
  • MPN: Does Not Apply
  • Brand: Energytech
  • Range: 40 km

40km Electric Fence Energiser 12V & Powerpack Plus Optional Solar Kit Available