Pool Fence DIY by Life Saver Fencing Section Kit, 4 x 12-Feet, Black. Easy-to-install, do-it-yourself fencing kit helps keep children safe from accidental falls into your pool. Each pole uses a 1/2 inch stainless steel peg to be inserted into the ground. Industrial-strength mesh fence at recommend U. CPSC height of 4 feet with 5 integrated poles with a 1/2-inch stainless steel pin. Fence can be easily removed when no children are present and re-inserted when needed. Non-corrosive latching system without sharp hooks or points. Backed by a limited lifetime. Installation requires a 1/2 Inches minimum rotary hammer drill with a standard 5/8 Inches long shaft masonry bit which is not included. Constructed from a special blend of glass-fiber reinforced polymers. Easy-to-install DIY fencing kit helps keep children safe from accidental falls into your home’s pool. Pool Fence DIY by Life Saver. A family owned and operated company based in Delray Beach, FL, Life Saver has been has been keeping little feet on solid ground for over 25 years. In addition to being a partner of the National Drowning Prevention Alliance, Life Saver is the only fence company recognized as a Safety Leader by the US Consumer Product Safety Commission’s Pool Safely Campaign. Pool Fence DIY 12-Foot Fence Section Kit. Your Family’s Safety Leaves No Room for Compromise. The Pool Fence DIY kit features one 12-foot long section of mesh fence with a 4-foot height as recommended by the U. Consumer Product Safety Commission. It’s supported by five integrated posts made of heavy gauge aluminum, and the kit comes with easy-to-follow instructions that make it easy to install the Pool Fence DIY. Kit includes 12-foot section of fencing, 5 poles (already assembled/attached), deck sleeves/caps, connecting latch, template, and instructions. Requires rotary hammer drill with 5/8 x 14-inch masonry bit (minimum; not included). The flexible design of Pool Fence DIY fencing sections easily fit around pools of all sizes and shapes. Unique Life Saving Features. The heart of a Pool Fence DIY system is its mesh fence. The polyvinyl basket weave is infused with top-of-the-line UV inhibitors that keep your pool fence looking great for years in all weather conditions. Constructed of solid high gauge aluminum, the integrated fence posts are spaced every 36 inches. Each post has a steel peg at the bottom that slips into sleeves that have been placed into drilled holes around your pool deck. Fence sections are connected by a stainless steel safety latch with a stainless steel spring that can be opened by left- or right-handed parents. Determine How Much Fence You Need. Measure around the edge of your pool and leave 24 to 36 inches of space for walking and cleaning. After determining your total footage, divide by 12 to calculate the correct number of sections needed. Pool Fence DIY Self-Closing Gate. It operates with sturdy double-truss uprights, ultra-reliable MagnaLatch gate latch (designed specifically for securing gates around swimming pools), and TruClose self-closing gate hinges. Pool Safety Tips from US Consumer Product Safety Commission. Ensure kids learn to swim. Properly fence all pools. Always watch kids in and around the water. Stay away from drains. Self-Closing Gate Kit Drill Guide Replacement Peg Pole Safety Sleeves and Caps Omni-Hanger. More from Pool Fence DIY by Life Saver. The self-closing, self-latching gate has a 2-foot walk-through opening and recommended U. CPSC height of 4 feet. The drill guide makes it easy to accurately and consistently drill required holes in concrete; includes attached bubble level. An extra peg pole is handy when an additional pole is needed, such as 90 degree turns or when following the pool’s exact contours. Replacement sleeves and caps for poles with 1/2-inch stainless steel pins; set of 5 in gray or tan. Set of two hooks for hooks for hanging towels and more; easily installs by removing existing pole cap. Easily customizable to fit around your pool, the Pool Fence DIY mesh pool safety system from Life Saver helps protect against accidental falls into your pool and can be installed by yourself (no contractor required). This 12-foot long section of fence has a 4-foot height (recommended by the Consumer Product Safety Commission) to help make your backyard pool area a safer place for children. In addition to concrete and subtantial surfaces, Pool Fence DIY by Life Saver can be installed into pavers, on sand/crushed stone, on a wood deck, and into dirt, rock gardens, and other loose surfaces. The UV-resistant mesh provides years of use in all weather conditions. The stainless steel pins are easily inserted into the supp;ied sleeves (after installation) and exceeds most local safety requirements. The fence can be removed when no children are present. To determine how much fencing your pool area needs, measure around the edge of your pool and leave 24 to 36 inches of space for walking and cleaning. When installed, poles are spaced out every 36 inches. Installation requires a rotary hammer drill with a standard 5/8-inch x 14-inch (minimum) masonry bit (not included). In addition to Pool Fence DIY, Life Saver offers a contractor-installed Pool Fence option in most populated areas of the country. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. The item “Pool Fence DIY by Life Saver Fencing Section Kit, 4 x 12-Feet, Black” is in sale since Friday, March 6, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Fences”. The seller is “topnotchgoods01″ and is located in Multiple, Locations. This item can be shipped to United States.
- Brand: Life Saver Pool Fence
- MPN: V110P-5