GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE

GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE
GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE
GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE
GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE
GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE

GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE
Introducing the GEN II conversion kit to make your vintage Delta Unisaws J. Et-lock fence function again. This sale is for one (1) complete kit to eliminate the poorly designed Delta Jet-lock single levers simultaneous clamping of the front casting and the rear rail on your vintage table saw fence. With this second generation of our redesigned internal components for the Jet-lock fence, your fence will lock securely to the front rail and allow for finger tightening of the rear rail clamp, the same way as was proven so reliable with the earlier Delta Micro-set fence. This new fence was supposed to lock the front head casting square with the rail by pushing down on the ball knob and lever and, at the same time, lock the rear of the fence at the back rail. The adjustment wasn’t that critical because the lever arm inside the head casting was supported on a very resilient rubber bushing and could flex as required to allow the clamping components at both ends of the fence equalize. After 10, then 15, and now 50 years…… These once resilient rubber bushings are rock hard, egg-shaped, cracked… There is no more “flex” in the clamping system. The adjustment of the top slotted sleeve is now virtually impossible to get right, so most users now just get along with a fence that won’t clamp in the rear. However, before the “better idea fence” came along, early Delta fences had a finger knob to lock the rear clamp after the ball knob and lever were depressed to square the fence to the front rail. These fences still work as good today as the day they were introduced. No rubber bushing to harden and crack, etc. HERE’S THE DEAL!!!! We have, for the second time, redesigned the internal components of the later Jet-lock fence to incorporate the finger nut clamping system for the rear rail clamp. Although it appears that way, it wasn’t as simple as replacing the screwdriver slotted sleeve with a knob. Our first design reused the original cast lever and provided a great improvement over the single lever clamping systems shortcomings. However, our just completed Gen II design went even further, prompting us to actually design and manufacture a new CNC machined lever arm for inside the head casting, along with the required bushings, spacer, pivot shafts, spring, and a longer pull rod. The parts that are removed and discarded from the head casting from your existing Jet-lock fence are shown in one of the labeled photos. The replacement parts that you would install are shown in another of the labeled photos. The photo of the reassembled head casting clearly shows the new lever, the new spring position, and the billet finger knob attached to the new pull rod for activating the rear rail clamp. Our retrofit kit incorporates some 16 new pieces and parts to make your Jet-lock fence work as efficiently as the early Delta Micro-set fence. Each kit will come with complete and easy to understand instructions to allow a normal hands-on type person to complete disassembly and reassembly of a Jet-lock fence in about an hour or two. A better and more time consuming rebuild would include sandblasting and repainting of the head casting between disassembly and reassembly. Additional parts to upgrade your now fully functional fence are also available. These include a new CNC machined geared adjusting shaft, a billet knob for the adjusting shaft, a complete billet aluminum rear rail clamping block, and a new Saturn knob & stainless steel lever arm. So you know, retro-fitting a Jet-lock fence with our Gen II kit is not difficult, but one task is a bit tricky. The one and only tricky part is removing the round cams pivot shaft in the head casting. Delta press fit this shaft into a blind hole. However, our instructions and included parts will guide you through this task and all of the others. As we do more and more of these retro-fits, we are finding slight variations in about 6-8% of the castings that require that the nylon bushing on the cam be shaved a bit to center the lever and/or the nylon bushing in the lever be shaved a bit to fit up into the opening at the 5/16 diameter pin. Neither of these tasks are difficult and should be anticipated if you are installing your own Gen II kit. An added feature of our new Gen II kit is that the new billet aluminum lever arm incorporates a means to adjust the Jet-lock lever and knobs locking position, like the vintage Delta Micro-set fence had. This easy-to-make adjustment allows you to control the height of the Saturn ball and lever at the lock position. Too high a position interferes with feeding stock through the saw. Too low of a position runs the lever arm out of stroke before clamping takes place. Jet-lock fences were designed and manufactured without this capability, but we have corrected that. The kit ships in two packagesone for all of the small parts and a second for the new longer aluminum pull rod. The item “GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE” is in sale since Monday, February 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Tools & Supplies\Other Woodworking”. The seller is “pd2bob” and is located in Freeland, Michigan. This item can be shipped to United States.
  • Brand: Custom Manufactured
  • Model: n/a
  • MPN: n/a
  • Country/Region of Manufacture: United States

GEN II CONVERSION KIT for the DELTA UNISAW JET- LOCK FENCE

Existing Fence Conversion System Kit for Cats

Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats
Existing Fence Conversion System Kit for Cats

Existing Fence Conversion System Kit for Cats
The Existing Fence Conversion System’s revolutionary Cat-Proofer extensions make it easy and affordable to convert most any 5′ or 6′ (or taller) fence or wall into a cat-proof barrier. The pivoting fence extensions are attached near the top of the inside of your fence and the high strength mesh material is stretched between them attaching with the included zip ties. Simply secure the lower portion of the mesh material to your fence or wall and your cat-proof barrier is complete. The system will adjust to fit just about every gate and corner situation making it very versatile. Included with each 100′ kit are (12) Spring-loaded arms (12) Arm Mounting Plates w/ arm setscrew, 100′ of 4′ high heavy duty black poly fence (1.75″ x 1.75″ grid) and (100) zip ties. The system is built to last. All arms are galvanized steel with a black powder coat finish, the arm hardware and springs are stainless steel and the fence material is UV stabilized with carbon black and additional chemical UV inhibitors. IMPORTANT: The fence mesh is 1.75″ x 1.75″ grid made from very strong poly material – NOT a flimsy netting. Accessories are available for, decorative aluminum, wrought iron, and PVC fences as well as walls. 2-Pack of Arms are also available. For every 100 feet ordered, it will include: (12) – Cat-Proofer Arms – Galvanized steel with a black powder coat finish. Stainless steel torsion spring and spring hardware. Mounting brackets included and measure 3″ x 3″. Arms project from mounting 31. (1) 100ft Roll of 4′ x 100′ – Black bioriented extruded polypropylene. UV stabilized with carbon and addition UV stabilizing chemical additives. (100) Standard Zip Ties – 50lb test – Black UV stabilized Packaging Specifics. Items of note when planning your order/layout. Each existing fence is unique! The maximum span between arms is 12-14 feet. 8-10 Feet is preferred. Count and measure the distance between your posts to ensure that a kit will cover your fence. Gates in your fence line require special consideration. Read below for more information on gate planning and installation. Gates need to be considered separately for your layout plan. Each gate in your existing fence is likely to need additional components depending on the location and operation. Many inward swinging gates require 1-2 extra arm/bracket(s) per gate. Your situation may vary. Many outward swinging gates require 2-3 extra arm/bracket(s) per gate. The item “Existing Fence Conversion System Kit for Cats” is in sale since Wednesday, September 5, 2018. This item is in the category “Pet Supplies\Cat Supplies\Furniture & Scratchers”. The seller is “pypventures” and is located in Lake Orion, Michigan. This item can be shipped to United States.
  • Brand: Purrfect Fence

Existing Fence Conversion System Kit for Cats

Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit

Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit

Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit
The Conversion System for Shorter Fences will allow you to add up to 3′ overall to the height of your existing fence… Now you can use Purrfect Fence to Cat-Proof your fence or wall even if it is only 3′ high! The Conversion System for Shorter Fences will convert your shorter fence into. 12 Cat-Proofer spring-loaded arms. For each arm, the associated mounting brackets and a 6′ tall roll. The extension tubes are made of thick 14 gauge steel (an arm set as high as possible on an extension tube can hold well over 50lbs). The scrunched end of the extension tube slides inside of the leg of the Conversion System Arms. The included high-strength epoxy bonds the pieces together. Once glued up, the extended arms slide into two mounting plates spaced a minimum of 4 apart secured to your fence posts with the top mounting plate set as high as possible on your post. Slide the arm to be at the desired height, tighten a set screw on each plate and your arm is secured to your post. Repeat this for all your posts and the fence material is ready to install. Please note: If the fence is chain link, decorative aluminum or other metal picket fence you will need U-Bolts to secure the mounting bracket to the posts. For every 100 feet ordered, it will include. (12) Pivoting Cat Arms. (12) 36in Long Arm Extenders. (24) Arm Mounting Brackets. (1) 6ft x 100ft Roll of Heavy Duty Black Poly Fence. (2) Standard Zip Ties (bag 100). Items of note when planning your order/layout. Each existing fence is unique! The maximum span between arms is 12-14 feet. 8-10 Feet is preferred. Count and measure the distance between your posts to ensure that a kit will cover your fence. Gates in your fence line require special consideration. Read below for more information on gate planning and installation. Gates need to be considered separately for your layout plan. Each gate in your existing fence is likely to need additional components depending on the location and operation. Many inward swinging gates require 1-2 extra arm/bracket(s) per gate. Your situation may vary. Many outward swinging gates require 2-3 extra arm/bracket(s) per gate. The item “Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit” is in sale since Wednesday, September 5, 2018. This item is in the category “Pet Supplies\Cat Supplies\Furniture & Scratchers”. The seller is “pypventures” and is located in Lake Orion, Michigan. This item can be shipped to United States.
  • Brand: Purrfect Fence

Purrfect Fence Existing Fence Conversion System for Shorter Fences Kit